AN 17-W 17产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Bearing Bore | 85 mm | |
| Threads No. per Inch | 12 | |
| Locknut | AN 17 | |
| Lockwasher | W 17 | |
| Max. Major Diameter | 84.84 mm | |
| Max. Major Diameter | 3.340 in | |
| Min. Major Diameter | 84.55 mm | |
| Min. Major Diameter | 3.3288 in | |
| Max. Pitch Diameter | 83.46 mm | |
| Max. Pitch Diameter | 3.2859 in | |
| Min. Pitch Diameter | 83.31 mm | |
| Min. Pitch Diameter | 3.2800 in | |
| Minor Diameter | 82.24 mm | |
| Minor Diameter | 3.2378 in | |
| Relief Diameter A | 81.45 mm | |
| Relief Diameter A | 3.2065 in | |
| Diameter S-3 | 80.96 mm | |
| Diameter S-3 | 3 3/16 | |
| W | 4.0 mm | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| W | 5/32 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| L | 16.70 mm | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| L | 0.6563 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| H | 3.2 mm | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| H | 1/8 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| S | 9.5 mm | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| S | 3/8 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| M | 6.40 mm | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| M | 1/4 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| C1 | 111.90 mm | |
| C1 | 4 13/32 | |
| D | 16.10 mm | |
| D | 0.6350 in | |
| Q | 1.80 mm | |
| Q | 0.072 in | |
| R | 87.0 mm | |
| R | 3.425 in | |
| B | 117.50 mm | |
| B | 4 5/8 | |
| s | 9.0 mm | |
| s | 0.353 in |
