参数 |
数据 |
说明 |
Series |
HM903200 |
|
Cone Part Number |
HM903244 |
|
Cup Part Number |
HM903216 |
|
Design Units |
Imperial |
|
Bearing Weight |
2.5000 lb |
|
Bearing Weight |
1.1000 Kg |
|
Cage Type |
Stamped Steel |
|
D - Cup Outer Diameter |
3.8750 in |
|
D - Cup Outer Diameter |
98.425 mm |
|
d - Cone Bore |
1.6250 in |
|
d - Cone Bore |
41.275 mm |
|
B - Cone Width |
1.1142 in |
|
B - Cone Width |
28.301 mm |
|
C - Cup Width |
0.8750 in |
|
C - Cup Width |
22.225 mm |
|
T - Bearing Width |
1.2188 in |
|
T - Bearing Width |
30.958 mm |
|
Z - Number of Rollers Per Row |
16 |
|
R - Cone Backface "To Clear" Radius |
0.060 in |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
1.520 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
0.030 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
0.76 mm |
These maximum fillet radii will be cleared by the bearing corners. |
da - Cone Frontface Backing Diameter |
2.13 in |
|
da - Cone Frontface Backing Diameter |
54.10 mm |
|
db - Cone Backface Backing Diameter |
2.32 in |
|
db - Cone Backface Backing Diameter |
58.93 mm |
|
Da - Cup Frontface Backing Diameter |
3.66 in |
|
Da - Cup Frontface Backing Diameter |
92.96 mm |
|
Db - Cup Backface Backing Diameter |
3.23 in |
|
Db - Cup Backface Backing Diameter |
82.04 mm |
|
Ab - Cage-Cone Frontface Clearance |
0.09 in |
|
Ab - Cage-Cone Frontface Clearance |
2.29 mm |
|
Aa - Cage-Cone Backface Clearance |
0.16 in |
|
Aa - Cage-Cone Backface Clearance |
4.06 mm |
|
a - Effective Center Location |
0.02 in |
Negative value indicates effective center inside cone backface. |
a - Effective Center Location |
0.50 mm |
Negative value indicates effective center inside cone backface. |
C90 - Dynamic Radial Rating (90 million revolutions) |
7950 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C90 - Dynamic Radial Rating (90 million revolutions) |
35400 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C1 - Dynamic Radial Rating (1 million revolutions) |
30700 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (1 million revolutions) |
136000 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C0 - Static Radial Rating |
29700 lbf |
|
C0 - Static Radial Rating |
132000 N |
|
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
10100 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
44800 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
0.79 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
0.74 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y - ISO Factor |
0.81 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
33.7 |
|
G2 - Heat Generation Factor (Rib-Roller End) |
9.91 |
|
Cg - Geometry Factor |
0.101 |
|