参数 |
数据 |
说明 |
Series |
M268700 |
|
Cone Part Number |
M268730 |
|
Cup Part Number |
M268710CD |
|
Design Units |
Imperial |
|
Bearing Weight |
535.4768 lb |
|
Bearing Weight |
242.8880 Kg |
|
Cage Type |
Pin-Type |
|
D - Cup Outer Diameter |
23.2500 in |
|
D - Cup Outer Diameter |
590.550 mm |
|
d - Cone Bore |
15.0000 in |
|
d - Cone Bore |
381.000 mm |
|
B - Cone Width |
4.5000 in |
|
B - Cone Width |
114.300 mm |
|
C - Double Cup Width |
7.6250 in |
|
C - Double Cup Width |
193.675 mm |
|
T - Bearing Width across Cones |
9.6249 in |
|
T - Bearing Width across Cones |
244.472 mm |
|
Z - Number of Rollers Per Row |
36 |
|
Ka - Locking Pin Diameter |
1.5 in |
|
Ka - Locking Pin Diameter |
38.1 mm |
|
Kb - Locking Pin Depth |
0.594 in |
|
Kb - Locking Pin Depth |
15.1 mm |
|
R - Cone Backface "To Clear" Radius |
0.250 in |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
6.400 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
0.06 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
1.5 mm |
These maximum fillet radii will be cleared by the bearing corners. |
db - Cone Backface Backing Diameter |
16.73 in |
|
db - Cone Backface Backing Diameter |
424.90 mm |
|
Da - Cup Frontface Backing Diameter |
22.14 in |
|
Da - Cup Frontface Backing Diameter |
562.36 mm |
|
Aa - Cage-Cone Backface Clearance |
0.42 in |
|
Aa - Cage-Cone Backface Clearance |
10.70 mm |
|
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
166000 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
740000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
1120000 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
4970000 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
290000 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
1290000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
94800 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
421000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
1.76 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
0.7 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
0.97 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
1.44 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y2 - ISO Factor |
1.44 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
5750 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G2 - Heat Generation Factor (Rib-Roller End) |
421 |
|
Cg - Geometry Factor |
0.232 |
Geometry constant for Lubrication Life Adjustment Factor a3l. |