590 - 592D产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 595 | |
| Cone Part Number | 590 | |
| Cup Part Number | 592D | |
| Design Units | Imperial | |
| Bearing Weight | 13.9760 lb | |
| Bearing Weight | 6.3394 Kg | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 6.0000 in | |
| D - Cup Outer Diameter | 152.400 mm | |
| d - Cone Bore | 3.1490 in | |
| d - Cone Bore | 79.985 mm | |
| B - Cone Width | 1.4300 in | |
| B - Cone Width | 36.322 mm | |
| C - Double Cup Width | 2.5000 in | |
| C - Double Cup Width | 63.500 mm | |
| T - Bearing Width across Cones | 3.2500 in | |
| T - Bearing Width across Cones | 82.550 mm | |
| Z - Number of Rollers Per Row | 24 | |
| Ka - Locking Pin Diameter | N/A | |
| Kb - Locking Pin Depth | N/A | |
| R - Cone Backface "To Clear" Radius | 0.140 in | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 3.600 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 0.03 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 0.8 mm | These maximum fillet radii will be cleared by the bearing corners. |
| db - Cone Backface Backing Diameter | 3.86 in | |
| db - Cone Backface Backing Diameter | 98.00 mm | |
| Da - Cup Frontface Backing Diameter | 5.71 in | |
| Da - Cup Frontface Backing Diameter | 144.02 mm | |
| Aa - Cage-Cone Backface Clearance | 0.16 in | |
| Aa - Cage-Cone Backface Clearance | 4.10 mm | |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 12600 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 56000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 84600 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 376000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 21900 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 97500 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 9530 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 42400 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.32 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.97 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 0.70 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 1.04 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 1.04 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 151 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G2 - Heat Generation Factor (Rib-Roller End) | 38.3 | |
| Cg - Geometry Factor | 0.142 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
