X32044XM - Y32044XM产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 32044X | |
| Cone Part Number | X32044XM | |
| Cup Part Number | Y32044XM | |
| Design Units | Metric | |
| Bearing Weight | 24.0000 Kg | |
| Bearing Weight | 52.9000 lb | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 340.000 mm | |
| D - Cup Outer Diameter | 13.3858 in | |
| d - Cone Bore | 220.000 mm | |
| d - Cone Bore | 8.6614 in | |
| B - Cone Width | 76.000 mm | |
| B - Cone Width | 2.9921 in | |
| C - Cup Width | 57.000 mm | |
| C - Cup Width | 2.2441 in | |
| T - Bearing Width | 76.000 mm | |
| T - Bearing Width | 2.9921 in | |
| Z - Number of Rollers Per Row | 27 | |
| R - Cone Backface "To Clear" Radius | 4.060 mm | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 0.160 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 3.05 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 0.120 in | These maximum fillet radii will be cleared by the bearing corners. |
| da - Cone Frontface Backing Diameter | 241.05 mm | |
| da - Cone Frontface Backing Diameter | 9.49 in | |
| db - Cone Backface Backing Diameter | 247.90 mm | |
| db - Cone Backface Backing Diameter | 9.76 in | |
| Da - Cup Frontface Backing Diameter | 326.14 mm | |
| Da - Cup Frontface Backing Diameter | 12.84 in | |
| Db - Cup Backface Backing Diameter | 311.91 mm | |
| Db - Cup Backface Backing Diameter | 12.28 in | |
| Ab - Cage-Cone Frontface Clearance | 3.81 mm | |
| Ab - Cage-Cone Frontface Clearance | 0.15 in | |
| Aa - Cage-Cone Backface Clearance | 10.41 mm | |
| Aa - Cage-Cone Backface Clearance | 0.41 in | |
| a - Effective Center Location | -3.30 mm | Negative value indicates effective center inside cone backface. |
| a - Effective Center Location | -0.13 in | Negative value indicates effective center inside cone backface. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 258000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 57900 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 994000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 223000 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C0 - Static Radial Rating | 1800000 N | |
| C0 - Static Radial Rating | 405000 lbf | |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 190000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 42700 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.36 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.43 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y - ISO Factor | 1.39 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 1207.8 | |
| G2 - Heat Generation Factor (Rib-Roller End) | 127.4 | |
| Cg - Geometry Factor | 0.151 |
