23268KEMBW906A产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Design Unit | Metric | |
| Bore Taper | 1/12 | |
| Bearing Weight | 292.4000 Kg | |
| Bearing Weight | 644.7000 lb | |
| Cage Type | EMB | |
| UPC Code | 087796191570 | |
| Cage Material | BRASS | |
| Superseded Part | 23268KYMBW906A | |
| D - Outer Diameter | 620.000 mm | |
| D - Outer Diameter | 24.4094 in | |
| d - Bore | 340.000 mm | |
| d - Bore | 13.3858 in | |
| B' - Inner Ring Width | 224.000 mm | |
| B' - Inner Ring Width | 8.8189 in | |
| B - Outer Ring Width | 224.000 mm | |
| B - Outer Ring Width | 8.8189 in | |
| Z - Number of Rollers Per Row | 19 | |
| R - Inner Ring "To Clear" Radius | 5.00 mm | Maximum housing fillet radius that bearing corners will clear. |
| R - Inner Ring "To Clear" Radius | 0.20 in | Maximum housing fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 5.00 mm | Maximum shaft fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 0.20 in | Maximum shaft fillet radius that bearing corners will clear. |
| da - Inner Ring Backing Diameter | 398.8 mm | |
| da - Inner Ring Backing Diameter | 15.70 in | |
| Da - Outer Ring Backing Diameter | 553.70 mm | |
| Da - Outer Ring Backing Diameter | 21.80 in | |
| D1 - Outer Ring Breakout Diameter | 524.500 mm | |
| D1 - Outer Ring Breakout Diameter | 20.6500 in | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 5160000 N | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 1161000 lbf | |
| C0 - Static Radial Rating | 8200000 N | |
| C0 - Static Radial Rating | 1845000 lbf | |
| e - ISO Factor | 0.35 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y0 - ISO Factor | 1.91 | These factors apply for both inch and metric calculations. See engineering |
| Y1 - ISO Factor | 2.84 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 1.86 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Reference Thermal Speed Rating (Grease) | 420 | |
| Reference Thermal Speed Rating (Oil) | 460 | See thermal speed ratings in the engineering section. |
| Cg - Geometry Factor | 0.1028 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
