22340EMBW33W45AW800产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Design Unit | Metric | |
| Bearing Weight | 93.0000 Kg | |
| Bearing Weight | 205.1000 lb | |
| Cage Type | EMB | |
| Cage Material | BRASS | |
| Superseded Part | 22340YMBW33W45AW800 | |
| D - Outer Diameter | 419.985 mm | |
| D - Outer Diameter | 16.5348 in | |
| d - Bore | 200.000 mm | |
| d - Bore | 7.874 in | |
| B' - Inner Ring Width | 138.000 mm | |
| B' - Inner Ring Width | 5.4331 in | |
| B - Outer Ring Width | 138.000 mm | |
| B - Outer Ring Width | 5.4331 in | |
| Z - Number of Rollers Per Row | 15 | |
| R - Inner Ring "To Clear" Radius | 4.00 mm | Maximum housing fillet radius that bearing corners will clear. |
| R - Inner Ring "To Clear" Radius | 0.16 in | Maximum housing fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 4.00 mm | Maximum shaft fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 0.16 in | Maximum shaft fillet radius that bearing corners will clear. |
| da - Inner Ring Backing Diameter | 247.3 mm | |
| da - Inner Ring Backing Diameter | 9.74 in | |
| Da - Outer Ring Backing Diameter | 368.70 mm | |
| Da - Outer Ring Backing Diameter | 14.52 in | |
| D1 - Outer Ring Breakout Diameter | 352.600 mm | |
| D1 - Outer Ring Breakout Diameter | 13.8800 in | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 2260000 N | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 509000 lbf | |
| C0 - Static Radial Rating | 2910000 N | |
| C0 - Static Radial Rating | 655000 lbf | |
| e - ISO Factor | 0.33 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y0 - ISO Factor | 2.02 | These factors apply for both inch and metric calculations. See engineering |
| Y1 - ISO Factor | 3.01 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 1.98 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Reference Thermal Speed Rating (Grease) | 970 | |
| Reference Thermal Speed Rating (Oil) | 1100 | See thermal speed ratings in the engineering section. |
| Cg - Geometry Factor | 0.0762 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
