230/560KYMBW906A产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Design Unit | Metric | |
| Bore Taper | 1/12 | |
| Bearing Weight | 337.9000 Kg | |
| Bearing Weight | 745.0000 lb | |
| Cage Type | YMB | |
| UPC Code | 087796029330 | |
| Cage Material | BRASS | |
| D - Outer Diameter | 820.000 mm | |
| D - Outer Diameter | 32.2835 in | |
| d - Bore | 560.000 mm | |
| d - Bore | 22.0472 in | |
| B' - Inner Ring Width | 195.000 mm | |
| B' - Inner Ring Width | 7.6772 in | |
| B - Outer Ring Width | 195.000 mm | |
| B - Outer Ring Width | 7.6772 in | |
| Z - Number of Rollers Per Row | 28 | |
| R - Inner Ring "To Clear" Radius | 5.00 mm | Maximum housing fillet radius that bearing corners will clear. |
| R - Inner Ring "To Clear" Radius | 0.20 in | Maximum housing fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 5.00 mm | Maximum shaft fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 0.20 in | Maximum shaft fillet radius that bearing corners will clear. |
| da - Inner Ring Backing Diameter | 619.3 mm | |
| da - Inner Ring Backing Diameter | 24.38 in | |
| Da - Outer Ring Backing Diameter | 764.10 mm | |
| Da - Outer Ring Backing Diameter | 30.08 in | |
| D1 - Outer Ring Breakout Diameter | 747.700 mm | |
| D1 - Outer Ring Breakout Diameter | 29.4400 in | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 5690000 N | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 1280000 lbf | |
| C0 - Static Radial Rating | 10800000 N | |
| C0 - Static Radial Rating | 2430000 lbf | |
| e - ISO Factor | 0.22 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y0 - ISO Factor | 3.14 | These factors apply for both inch and metric calculations. See engineering |
| Y1 - ISO Factor | 4.67 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 3.07 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Reference Thermal Speed Rating (Grease) | 390 | |
| Reference Thermal Speed Rating (Oil) | 450 | See thermal speed ratings in the engineering section. |
| Cg - Geometry Factor | 0.1334 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
